Go to unlockcellpro.com to get the Phone Unlock Code

IMPORTANT: If you get a ‘Code Error’ message do NOT keep trying because you only have limited attempts. Please check the IMEI, Network, Network Country, and contact us

• Ensure a SIM Card is inserted
• Go to ‘Manage Connections’
• Click on ‘Turn All Connections Off’
• Go to ‘Options’
• Click on ‘Advanced Options’
• Click on ‘SIM Card’
• Type ‘MEPD’ (NOTE: you might need to type in caps, also letters will not appear on-screen but you will be presented with personalization screen, that will display 5 locks such as network, service provider etc)
• Type ‘MEP2′ (NOTE: user will be prompted to enter MEP code)
• Enter the MEP2 code (CONFIRM you get “Code Accepted” message)
  • *If you also have a MEP4 code, type ‘MEP4′ (you will be prompted to enter MEP code)
  • Enter the MEP4 code (CONFIRM you get “Code Accepted” message)
• Reboot device
• Go to ‘Manage Connections’
• Click on ‘Restore Connections’
• Device is now unlocked

In order to connect to network please follow steps below:

• Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device off is necessary even if you have SIM of choice inserted.
• Turn the phone back on
• Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
• Set Network Mode to 3G & 2G.
• Press the Back Arrow Button once to exit and save settings.
• Inside the Manage Connections, set Mobile Network to on.
• Return to the main screen by pressing End Call and you should see your phone getting signal

As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again